Acratech unveils tripod heads and supports

Written by Adorama News Writer
|
Published on January 29, 2008
Adorama News Writer
Adorama ALC

th an adjustable front to back positioning of the nodal point (shown); a Leveling Quick release base; and a universal “L” bracket.



For details, read the Acratech press releases:



Universal “L” Bracket:



The new Acratech Universal ‘L’ bracket is a practical alternative to dedicated ‘L’ brackets. Its design allows the weight of the camera to stay centered over the tripod during vertical or portrait shots and it attaches to your camera with an “Arca” type clamp so it is quickly removed for hand held shots.


  • Easily holds over 25 lbs (11.4kg) at any angle.
  • Adjusts to fit most SLR and DSLR cameras.
  • Precision C.N.C. machined.
  • Compatible with Acratech, Kirk, Arca, R.R.S., and many other QR plates and clamps.
  • Beautiful satin black anodized finish.
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.

GV2 Ballhead:



The new Acratech GV2 ballhead has all of the features of the original Acratech Ultimate Ballhead along with the range of motion similar to a conventional ballhead. Acratech has added an adjustable tension knob, which is used to pretension the ball for the desired amount of friction. The feature which sets the GV2 apart from all other ballheads is that it can be used as a Gimbal head with lenses up to 400 f4.0.


  • Works as a Gimbal head with lenses up to 400 f4.0
  • Weighs less than 1 lb (.45kg) with quick release clamp.
  • Easily holds over 25 lbs (11.4kg) at any angle.
  • Full movements allow any camera position.
  • Fully adjustable tension control.
  • Precision C.N.C. machined.
  • Compatible with Kirk, Arca, R.R.S., and many other QR plates.
  • Beautiful satin black anodized finish.
  • Fits all standard tripods (1/4-20 and 3/8-16 threads).
  • Laser engraved degree markings.
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.
  • Ball will not shift when tightened.
  • Oil-less and greaseless ball will not attract or hold dirt and debris.
  • All knobs are secured so they cannot vibrate loose and fall off.

The Acratech leveling base is used to quickly and easily level the bottom of your tripod head or panoramic device to produce accurate and properly aligned panoramic images.

  • Weighs 1/2 lb (.24kg).
  • Easily holds over 25 lbs. (11.4 kg).
  • Allows 10 degrees of movement in any direction.
  • Precision C.N.C. machined.
  • Beautiful satin black anodized finish.
  • Fits all standard tripods (1/4-20 and 3/8-16 threads).
  • Fits all standard 3/8-16 tripod heads (1/4-20 model available soon).
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.
  • Ball will not shift when tightened.
  • Oil-less and greaseless ball will not attract or hold dirt and debris.
  • Smooth knob action for easy and secure positioning.
  • Precision bulls-eye level for accurate positioning.
  • All knobs are secured so they cannot vibrate loose and fall off.
  • Low profile design, only 1.77” tall (not including stud).
  • Patent pending.

Leveling head with quick release clamp:


The Acratech leveling head with an Arca-Swiss compatible quick release clamp is sturdy and light weight and weighs only about 8 oz (.2 kg). It is designed to provide 10 degrees of movement in any direction. Vertical shots are quick and easy when the leveling head is used with our universal ‘L’ bracket.

  • Weighs about 1/2 lb (.2kg).
  • Easily holds over 25 lbs. (11.4 kg).
  • Allows 10 degrees of movement in any direction.
  • Precision C.N.C. machined.
  • Beautiful satin black anodized finish.
  • Fits all standard tripods (1/4-20 and 3/8-16 threads).
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.
  • Ball will not shift when tightened.
  • Oil-less and greaseless ball will not attract or hold dirt and debris.
  • Smooth knob action for easy and secure positioning.
  • Precision bulls eye level for accurate positioning.
  • All knobs are secured so they cannot vibrate loose and fall off.
  • Low profile design, only 2” (50 mm) tall.
  • Patent pending.

Long lens head:



The Acratech long lens head is designed to solidly support super telephoto lenses such as 600 f4s and to provide ease of use, freedom of movement and weighs less than 1 lb.


  • Weighs less than 1 lb (.45kg) with quick release clamp.
  • Will easily support 600 f4.0 lenses.
  • Provides easy, smooth balance for long lenses.
  • Large 18mm (.708”) bulls-eye level
  • Fully adjustable tension control.
  • Precision C.N.C. machined.
  • Compatible with Kirk, Arca, R.R.S., and many other QR plates.
  • Beautiful satin black anodized finish.
  • Fits all standard tripods (1/4-20 and 3/8-16 threads).
  • Laser engraved degree markings.
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.
  • All knobs are secured so they cannot vibrate loose and fall off.
  • Indexable clamp eliminates the need to carry a second tripod head for camera bodies without lens tripod collars.

Nodal Rail:



The Acratech Nodal Rail is designed to adjust your cameras position, front to back to enable positioning of the lens nodal point over the center of rotation for accurate stitched panoramic images. The Acratech nodal rail also features stops that can be preset to the nodal point of your two favorite focal lengths.

  • Easily holds over 25 lbs (11.4kg).
  • Indexable clamp can be rotated in 90 degree increments.
  • Double dovetail for added versatility.
  • Precision C.N.C. machined.
  • Compatible with Acratech, Kirk, Arca, R.R.S., and many other QR plates.
  • Beautiful satin black anodized finish.
  • Laser engraved scale markings.
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.

New Quick Release Clamp:



The new Acratech Quick Release clamp features a large 15mm bulls eye level, is a full 60mm long and weighs less than 3 oz (.085kg) and it fits all “Arca-Swiss” compatible plates. The Acratech quick release clamp also features a detent pin to prevent the quick release plate accidentally sliding out.
.

  • Easily holds over 25 lbs (11.4kg).
  • Weighs less than 3 oz (.085kg).
  • Large 15mm bulls eye level.
  • 60mm (2 3/8”) long.
  • Detent pin prevents plates from accidentally sliding out.
  • Precision C.N.C. machined.
  • Compatible with Acratech, Kirk, Arca, R.R.S., and many other QR plates.
  • Beautiful satin black anodized finish.
  • Fits all standard tripod heads (1/4-20 and 3/8-16 threads).
  • Solid precision feel.
  • Long lasting stainless steel hardware.
  • Made in U.S.A.
  • Patent pending.

“XY” Dual Axis Macro Focusing Rail:



The new Acratech “XY” dual axis Macro Focusing Rail fits into any standard “Arca” type quick release clamp and provides 95 mm (3.75”) of precision movement. Our Macro Focusing Rail features a high precision, gun drilled, lead screw for precise movement and light weight.

  • Weighs less than 1 lb (.45kg) with quick release clamp.
  • Easily holds over 25 lbs (11.4kg).
  • 95 mm (3.75”) of precision movement on each axis.
  • 125 mm (5”) long rails.
  • Precision C.N.C. machined.
  • Compatible with Acratech, Kirk, Arca, R.R.S., and many other QR clamps.
  • Beautiful satin black anodized finish.
  • Fits all standard tripods (1/4-20 and 3/8-16 threads).
  • Fits ¼-20 and 3/8-16 quick release clamps.
  • Long lasting stainless steel hardware.
  • Laser engraved scale markings.
  • Solid precision feel.
  • Made in U.S.A.
  • Easy grip rubberized knobs.
  • All knobs are secured so they cannot vibrate loose and fall off.